Storz Hydraulik Gleichgangszylinder Storz Hydraulik Gleichgangszylinder
Technical Documents
ZG 2511 – Standard hydraulic cylinders (DIN 24333) – Nominal pressure 250 bar with piston rod on both sides
Good to know: These hydraulic cylinders have a piston rod that emerges on either side. Their components essentially correspond to the standardized ZBD 2511 series.
- Available in 3 mounting types, as well as several sealing variants and piston rod materials, for a wide range of applications
- Developed as an addition to the STORZ ZBD 2511 hydraulic cylinder series, designed in accordance with the ISO 6022, DIN 24333 and VW 39D921 standards
- Two piston rod diameters with the corresponding area ratios j=1.6 and j=2 are assigned to each piston diameter as standard
Technical data
| Nominal pressure: | 250 bar (25 MPa) |
| Static test pressure: | 375 bar (37,5 MPa) |
| Piston diameter: | 40-250 mm (larger than special version) |
| Area ratio j: | 1,6 and 2 |
| Temperature range: | -20…+80 °C |
| Viscosity range: | 10…600 mm²/s |
| Lifting speed: | 0 – 1 m/s depending on seal variant |
| Operating medium: | Mineral oil according to DIN 51524, HFD fluids HFA, HFB and HFC fluids possible through special designs |
Mounting types
A Basic design
MT4 Trunnion
