Discover the free hydraulic cylinder cross-referencing service from Storz! Our specialists convert designations from all popular manufacturers and mounting parts to Storz products, based on datasheets and a proprietary compatibility testing process. Benefit from up-to-date data and receive feedback within 24 hours. Contact us and take advantage of our secure service, compliant with German data protection regulations, today!
Looking specifically for a replacement for Bosch Rexroth cylinders? Take advantage of our free Rexroth cross-referencing – we will find the right, ready-to-ship Storz equivalent.
Do you use Bosch Rexroth hydraulic cylinders and are looking for a high-quality, ready-to-ship alternative? Storz offers direct replacements for the common Rexroth series – from differential cylinders and synchronous cylinders to cylinders with an integrated position measuring system.
Our cylinders are compatible with the Rexroth series CDH, CDM, CDT, CGH, CGM, CGT, CSH and CSM. Identical mounting dimensions, installation lengths, area ratios, piston rod ends and port threads ensure international interchangeability – a simple swap with no modifications to your system.
All Storz cylinders are manufactured in our own production facility in Wurmlingen (Baden-Württemberg, Germany) and comply with the DIN 24333, ISO 6022, ISO 6020/1 and ISO 6020/2 standards.
| Rexroth | Storz | Nominal pressure | Piston Ø | Standard | Test pressure |
|---|---|---|---|---|---|
| CDH1 | ZBD 2512 | 250 bar | 40–320 mm | – | 375 bar |
| CDH2 | ZBD 2511 | 250 bar | 40–250 mm | DIN 24333 / ISO 6022 | 375 bar |
| CDH3 | ZBD 3501 | 350 bar | 40–200 mm | – | 525 bar |
| CDM1 | ZBD 1611 | 160 bar | 25–200 mm | ISO 6020/1 | 240 bar |
| Rexroth | Storz | Nominal pressure | Piston Ø | Standard | Test pressure |
|---|---|---|---|---|---|
| CGH | ZG 2511 | 250 bar | 40–250 mm | ISO 6022 | 375 bar |
| CGM | ZG 1611 | 160 bar | 25–200 mm | ISO 6020/1 | 240 bar |
| CGM | ZG 1605 | 160 bar | 25–200 mm | ISO 6020/2 | 240 bar |
| Rexroth | Storz | Nominal pressure | Piston Ø | Standard | Test pressure |
|---|---|---|---|---|---|
| CSH | ZW/ZWAS 2511 | 250 bar | 40–250 mm | DIN 24333 / ISO 6022 | 375 bar |
| CSM | ZW/ZWAS 1611 | 160 bar | 32–200 mm | ISO 6020/1 | 240 bar |
For additional series, special dimensions or custom adaptations, contact us – free cross-referencing within 24 hours.
The Storz ZBD 2512 series is directly interchangeable with the Rexroth CDH1 series. Identical mounting dimensions, installation lengths and port threads allow a straightforward 1:1 replacement with no conversion.
| Nominal pressure | 250 bar (25 MPa) |
| Static test pressure | 375 bar (37.5 MPa) |
| Piston diameter | 40 – 320 mm |
| Temperature range | -20 to +80 °C |
| Stroke speed | 0 – 0.5 m/s (up to 1 m/s depending on seal) |
| Mounting types | 6 variants |
| Seal variants | 6 variants |
| Hydraulic fluid | Mineral oil DIN 51524, HFD |
The Storz ZBD 2511 complies with ISO 6022, DIN 24333 and VW 39D921. Each piston diameter is assigned two rod diameters (area ratios 1.6 and 2).
| Nominal pressure | 250 bar (25 MPa) |
| Static test pressure | 375 bar (37.5 MPa) |
| Piston diameter | 40 – 250 mm |
| Area ratio | 1.6 and 2 |
| Standards | ISO 6022, DIN 24333, VW 39D921 |
| Mounting types | 5 standardised variants |
| Seal variants | 6 variants |
The Storz ZBD 3501 is designed for high-pressure applications up to 350 bar and is suitable as a direct replacement for the Rexroth CDH3 series.
| Nominal pressure | 350 bar (35 MPa) |
| Static test pressure | 525 bar (52.5 MPa) |
| Piston diameter | 40 – 200 mm |
| Temperature range | -20 to +80 °C |
The Storz ZBD 1611 complies with ISO 6020/1 and VW 39D920. With 8 standardised mounting types and 6 seal variants, it offers maximum flexibility as a replacement for the Rexroth CDM1 series.
| Nominal pressure | 160 bar (16 MPa) |
| Static test pressure | 240 bar (24 MPa) |
| Piston diameter | 25 – 200 mm |
| Area ratio | 1.4 and 2 |
| Standards | ISO 6020/1, VW 39D920 |
| Mounting types | 8 standardised variants |
| Seal variants | 6 variants |
| Hydraulic fluid | Mineral oil DIN 51524, HFD |
The Storz ZBD 1605 in tie-rod design complies with DIN 24554 (a modified selection series derived from ISO 6020/2) and is the direct replacement for the Rexroth CDT3 series. Each piston diameter is assigned two rod diameters.
| Nominal pressure | 160 bar (16 MPa) |
| Static test pressure | 240 bar (24 MPa) |
| Piston diameter | 25 – 200 mm |
| Area ratio | 1.25 and 2 |
| Standards | DIN 24554, ISO 6020/2 (tie-rod design) |
| Mounting types | 5 standardised variants |
| Seal variants | 5 variants |
| Hydraulic fluid | Mineral oil DIN 51524 |
The Storz ZG series comprises synchronous cylinders with a piston rod on both sides for symmetrical movements. They are designed as a direct replacement for the Rexroth CGH2 and CGM1 series.
| Nominal pressure | 250 bar (25 MPa) |
| Piston diameter | 40 – 250 mm |
| Area ratio | 1.6 and 2 |
| Stroke speed | 0 – 1 m/s |
| Standard | ISO 6022 |
| Design | Double-sided piston rod |
| Rexroth equivalent | CGH |
| Nominal pressure | 160 bar (16 MPa) |
| Piston diameter | 25 – 200 mm |
| Area ratio | 1.4 and 2 |
| Stroke speed | 0 – 1 m/s |
| Standard | ISO 6020/1 |
| Rexroth equivalent | CGM |
| Nominal pressure | 160 bar (16 MPa) |
| Piston diameter | 25 – 200 mm |
| Area ratio | 1.25 and 2 |
| Stroke speed | 0 – 0.5 m/s |
| Standard | ISO 6020/2 |
| Rexroth equivalent | CGM |
The Storz ZW/ZWAS series offers hydraulic cylinders with an integrated position measuring system (standard: MTS or Balluff). They are designed as a replacement for the Rexroth CSH2 and CSM1 series. The ZWAS variant additionally features a mounted valve connection plate.
| Nominal pressure | 250 bar (25 MPa) |
| Piston diameter | 40 – 250 mm |
| Area ratio | 1.6 and 2 |
| Standards | ISO 6022, DIN 24333, VW 39D921 |
| Position measuring system | MTS or Balluff (standard) |
| ZWAS variant | With mounted valve connection plate |
| Rexroth equivalent | CSH |
| Nominal pressure | 160 bar (16 MPa) |
| Piston diameter | 32 – 200 mm |
| Area ratio | 1.4 and 2 |
| Standards | ISO 6020/1, VW 39D920 |
| Position measuring system | MTS or Balluff (standard) |
| Rexroth equivalent | CSM |
Same installation dimensions, port threads and mounting points as the Rexroth originals. No conversion needed – simply swap.
In-house production in Wurmlingen, Baden-Württemberg. A personal contact and quality assurance in accordance with DIN/ISO standards.
Standard cylinders from stock. Special dimensions and custom adaptations possible with short production times.
Send us your Rexroth designation, e.g. CDH1 MP5/63/45/800 – by form, email or phone.
Our engineers check compatibility and create your Storz equivalent – within 24 hours.
You receive a binding quote including price, delivery time and technical datasheet.
Rexroth is a registered trademark of Bosch Rexroth AG. Storz Hydraulik has no business relationship with Bosch Rexroth; the name is used solely to indicate the compatibility of our replacement cylinders.
To ensure you reach the right person straight away, the department selection takes you there quickly.
… or send us your Rexroth designation directly (e.g. CDH1) — we will supply the matching Storz equivalent.
